BCM43143KMLGT Datasheet, PDF (41/58 Pages) Cypress Semiconductor – Single-Chip IEEE 802.11b/g/n MAC/PHY/Radio with USB/SDIO Host Interface

BCM43143 Advance Data Sheet
2.4 GHz Band Receiver RF Specifications
Table 15: 2.4 GHz Receiver Sensitivity
Rate/Modulation
Typical Receive Sensitivity^{a b}(dBm)
1 Mbps DSSS
–97
2 Mbps DSSS
–95
5.5 Mbps CCK
–91
11 Mbps CCK
–89
6 Mbps OFDM
–91
9 Mbps OFDM
–90
12 Mbps OFDM
–88
18 Mbps OFDM
–86
24 Mbps OFDM
–84
36 Mbps OFDM
–81
48 Mbps OFDM
–78
54 Mbps OFDM
–76
MCS0 (20 MHz channel)
–91
MCS1 (20 MHz channel)
–88
MCS2 (20 MHz channel)
–86
MCS3 (20 MHz channel)
–83
MCS4 (20 MHz channel)
–81
MCS5 (20 MHz channel)
–77
MCS6 (20 MHz channel)
–75
MCS7 (20 MHz channel)
–73
MCS0 (40 MHz channel)
–90
MCS1 (40 MHz channel)
–86
MCS2 (40 MHz channel)
–84
MCS3 (40 MHz channel)
–82
MCS4 (40 MHz channel)
–78
MCS5 (40 MHz channel)
–74
MCS6 (40 MHz channel)
–72
MCS7 (40 MHz channel)
–70
a. Values are measured at the input of the BCM43143. Thus, they include insertion losses from the integrated
baluns and integrated T/R switches, but exclude losses from the external circuits. For the 1, 2, 5.5, and 11 Mbps
rates, sensitivity is defined as an 8% packet error rate (PER) for 1000-octet PSDUs. For 11g rates (6 Mbps
OFDM up to 54 MBps OFDM), sensitivity is defined as a 10% packet error rate (PER) for 1000-octet PSDUs.
For 11n rates (MCS0 to MCS7), sensitivity numbers are provide for 10% PER and 4000byte packets.
b. Sensitivity levels at Vcc=3.3V±6%; at Vcc=3.3 ±10%, sensitivity levels may be degraded.
Broadcom^®
November 14, 2014 • 43143-DS104-R
Single-Chip IEEE 802.11b/g/n MAC/PHY/Radio
Page 40