AK5406 Datasheet, PDF (14/37 Pages) Asahi Kasei Microsystems – 80MSPS Triple ADC for Displays

ASAHI KASEI
[AK5406]
Control Serial I/F
This is a control register with I²C Serial Interface.
An external pull-up resistor should be connected on SDA pin.
Data on SDA line is captured at the rising edge of SCL.
Make certain that Data on SDA line changes state only during SCL at low condition.
When SDA changes state while SCL is at high condition, it is interpreted to be a Start
condition if the change occurs at the falling transition, and it is to be a Stop condition
if it occurs at the rising transition.
MS0592-E-01
14
2008/07