DS922 Datasheet, PDF (76/77 Pages) Xilinx, Inc – DC and AC Switching Characteristics

Kintex UltraScale+ FPGAs Data Sheet: DC and AC Switching Characteristics
eFUSE Programming Conditions
Table 89: eFUSE Programming Conditions⁽¹⁾
Symbol
Description
Min
Typ
Max
Units
I_PLFS
t_j
V_CCAUX supply current.
Temperature range.
–
–
115
mA
–40
–
125
°C
Notes:
1. Do not program eFUSE during device configuration (e.g., during configuration, during configuration readback, or when
readback CRC is active).
Revision History
The following table shows the revision history for this document.
Date
05/09/2016
11/24/2015
Version
1.1
1.0
Description of Revisions
In Table 1 revised V_IN for HP I/O banks. Updated Note 5 in Table 3. Added values to
Table 7. Added MIPI_DPHY_DCI to Table 9, Table 10, and Table 12. Updated and added
notes in Table 18 and Table 19. Updated Table 20 speed specifications for Vivado Design
Suite 2016.1. Removed Table 23, Video Codec Unit Performance. Updated Table 24.
Expanded and updated Table 26. Updated Table 27 and Table 28. Updated Table 30 and
Table 31 with MIPI D-PHY values. Updated the tables in the I/O Standard Adjustment
Measurement Methodology section. In Table 32, added the Block RAM and FIFO
Clock-to-Out Delays section. Updated Table 39 to Table 43. Revised the symbol names in
Table 42. Revised typical values in Table 47. Updated the -2 (0.72V) and -1 (0.72V)
values in Table 49. Added Table 52 and Table 70. Added Note 2 to Table 64. Revised
Table 72. Revised data and added notes to Table 67, Table 82, and Table 83. Revised INL
in Table 85. Added notes to Table 86 and Table 87. Many revised sections in Table 88.
Initial Xilinx release.
DS922 (v1.1) May 9, 2016
Advance Product Specification
www.xilinx.com
Send Feedback
76