DS922 Datasheet, PDF (2/77 Pages) Xilinx, Inc – DC and AC Switching Characteristics

Kintex UltraScale+ FPGAs Data Sheet: DC and AC Switching Characteristics
Table 1: Absolute Maximum Ratings⁽¹⁾ (Cont’d)
Symbol
Description
I_DC
Available output current at the pad.
I_RMS
Available RMS output current at the pad.
GTH or GTY Transceiver
V_MGTAVCC
Analog supply voltage for the GTH or GTY transmitter and
receiver circuits.
V_MGTAVTT
Analog supply voltage for the GTH or GTY transmitter and
receiver termination circuits.
V_MGTVCCAUX
Auxiliary analog Quad PLL (QPLL) voltage supply for the GTH
or GTY transceivers.
V_MGTREFCLK
GTH or GTY transceiver reference clock absolute input
voltage.
V_MGTAVTTRCAL
Analog supply voltage for the resistor calibration circuit of
the GTH or GTY transceiver column.
V_IN
Receiver (RXP/RXN) and transmitter (TXP/TXN) absolute
input voltage.
I_DCIN-FLOAT
DC input current for receiver input pins DC coupled RX
termination = floating.
I_DCIN-MGTAVTT
I_DCIN-GND
DC input current for receiver input pins DC coupled RX
termination = V_MGTAVTT.
DC input current for receiver input pins DC coupled RX
termination = GND.
I_DCIN-PROG
DC input current for receiver input pins DC coupled RX
termination = programmable.
I_DCOUT-FLOAT
DC output current for transmitter pins DC coupled RX
termination = floating.
I_{DCOUT-MGTAVTT}
DC output current for transmitter pins DC coupled RX
termination = V_MGTAVTT.
System Monitor
V_CCADC
V_REFP
System Monitor supply relative to GNDADC.
System Monitor reference input relative to GNDADC.
Min
–0.500
–0.500
–0.500
–0.500
–0.500
–0.500
–
–
–
–
–
–
0.500
0.500
Max
Units
mA
mA
1.000
V
1.300
V
1.900
V
1.300
V
1.300
V
1.200
V
mA
0⁽⁸⁾
mA
0⁽⁸⁾
mA
0⁽⁸⁾
mA
mA
mA
2.000
V
2.000
V
DS922 (v1.1) May 9, 2016
Advance Product Specification
www.xilinx.com
Send Feedback
2