W83637HF Datasheet, PDF (55/149 Pages) Winbond – LPC I/O

W83637HF
BEEP Control Register 1-- Index 56h (Bank 0)
Register Location:
56h
Power on Default Value
00h
Attribute:
Read/Write
Size:
8 bits
7 65432 1 0
EN_VCORE_BP
EN_VIN1_BP
EN_+3.3VIN_BP
EN_+5VIN_BP
EN_SYSTIN_BP
EN_CPUTIN_BP
EN_FAN1_BP
EN_FAN2_BP
Bit 7: BEEP output control for FAN 2 if the monitor value exceed the limit value. Write 1, enable BEEP
output. Write 0, disable BEEP output, which is default value.
Bit 6: BEEP output control for FAN 1 if the monitor value exceed the limit value. Write 1, enable BEEP
output. Write 0, disable BEEP output, which is default value.
Bit 5: BEEP output control for temperature CPUTIN if the monitor value exceed the limit value. Write 1,
enable BEEP output. Write 0, disable BEEP output, which is default value.
Bit 4: BEEP output control for temperature SYSTIN if the monitor value exceed the limit value. Write 1,
enable BEEP output. Write 0, disable BEEP output, which is default value.
Bit 3: BEEP output control for +5VIN if the monitor value exceed the limit value. Write 1, enable BEEP
output. Write 0, disable BEEP output, which is default value.
Bit 2: BEEP output control for +3.3VIN if the monitor value exceed the limit value. Write 1, enable
BEEP output. Write 0, disable BEEP output, which is default value.
Bit 1: BEEP output control for VIN1 if the monitor value exceed the limit value. Write 1, enable BEEP
output. Write 0, disable BEEP output, which is default value.
Bit 0: BEEP output control for CPUVCORE if the monitor value exceed the limit value. Write 1, enable
BEEP output. Write 0, disable BEEP output, which is default value.
- 50 -
Publication Release Date: June 25, 2003
Revision 1.3