W83637HF Datasheet, PDF (129/149 Pages) Winbond – LPC I/O

W83637HF
CRF6 (Default 0x00)
Bit 7 - 0 _{: Enable bits of the SMI / PME generation due to the device's IRQ.}
These bits enable the generation of an SMI / PME interrupt due to any IRQ of the
Bit 7
devices. SMI / PME logic output = (MOUIRQEN and MOUIRQSTS) or (KBCIRQEN and
KBCIRQSTS) or (PRTIRQEN and PRTIRQSTS) or (FDCIRQEN and FDCIRQSTS)
or (URAIRQEN and URAIRQSTS) or (URBIRQEN and URBIRQSTS) or
(HMIRQEN and HMIRQSTS) or (WDTIRQEN and WDTIRQSTS) or
(IRQIN3EN and IRQIN3STS) or (IRQIN2EN and IRQIN2STS) or
(IRQIN1EN and IRQIN1STS) or (IRQIN0EN and IRQIN0STS)
: MSIRQEN.
= 0 disable the generation of an SMI / PME interrupt due to MS's IRQ.
Bit 6
Bit 5
= 1 enable the generation of an SMI / PME interrupt due to MS's IRQ.
Reserved
: MOUIRQEN.
= 0 disable the generation of an SMI / PME interrupt due to MOUSE's IRQ.
Bit 4
= 1 enable the generation of an SMI / PME interrupt due to MOUSE's IRQ.
: KBCIRQEN.
= 0 disable the generation of an SMI / PME interrupt due to KBC's IRQ.
Bit 3
= 1 enable the generation of an SMI / PME interrupt due to KBC's IRQ.
: PRTIRQEN.
= 0 disable the generation of an SMI / PME interrupt due to printer port's IRQ.
Bit 2
= 1 enable the generation of an SMI / PME interrupt due to printer port's IRQ.
: FDCIRQEN.
= 0 disable the generation of an SMI / PME interrupt due to FDC's IRQ.
Bit 1
= 1 enable the generation of an SMI / PME interrupt due to FDC's IRQ.
: URAIRQEN.
= 0 disable the generation of an SMI / PME interrupt due to UART A's IRQ.
Bit 0
= 1 enable the generation of an SMI / PME interrupt due to UART A's IRQ.
: URBIRQEN.
= 0 disable the generation of an SMI / PME interrupt due to UART B's IRQ.
= 1 enable the generation of an SMI / PME interrupt due to UART B's IRQ.
- 124 -
Publication Release Date: June 25, 2003
Revision 1.3