DS90UB928Q-Q1 Datasheet, PDF (9/69 Pages) Texas Instruments – 5 MHz to 85 MHz 24-bit Color FPD-Link III to FPD-Link Deserializer With Bidirectional Control Channel

www.ti.com
DS90UB928Q-Q1
SNLS417C – MARCH 2013 – REVISED JULY 2016
7.5 DC Electrical Characteristics
Over recommended operating supply and temperature ranges unless otherwise specified. ^{(1) (2) (3)}
PARAMETER
TEST CONDITIONS
PIN/FREQ.
MIN TYP
MAX UNIT
3.3 V LVCMOS I/O
V_IH
V_IL
High Level Input Voltage
Low Level Input Voltage
V_DDIO = 3.0 V to 3.6 V
GPIO[3:0],
REG_GPIO[8:
5], LFMODE,
2.0
GND
V_DDIO V
0.8 V
MAPSEL,
BISTEN,
I_IN
Input Current
V_IN = 0 V or V_IN = 3.0 V to 3.6 V
BISTC,
INTB_IN,
−10
±1
+10 μA
OEN,
OSS_SEL
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
(4)_PDB
I_IN
Input Current
V_IN = 0 V or V_IN = 3.0 V to 3.6 V
(4)
2.0
GND
−10
V_DDIO V
0.7 V
±1
+10 μA
V_OH
HIGH Level Output Voltage
I_OH = -4 mA
V_OL
LOW Level Output Voltage
I_OL = +4 mA
I_OS
Output Short Circuit Current
V_OUT = 0 V ⁽⁵⁾
GPIO[3:0],
REG_GPIO[8:
5], MCLK,
I2S_WC,
2.4
V_DDIO V
0
0.4 V
−55
mA
I2S_CLK,
I_OZ
Tri-state Output Current
V_OUT = 0 V or V_DDIO, PDB = L ^I2S_D[A:D],
−20
LOCK, PASS
+20 μA
(1) The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as
otherwise modified or specified by the Electrical Characteristics conditions and/or notes. Typical specifications are estimations only and
are not ensured.
(2) Typical values represent most likely parametric norms at V_DD33 = 3.3 V, V_DDIO = 1.8 V or 3.3 V, T_A = 25°C, and at the Recommended
Operating Conditions at the time of product characterization and are not ensured.
(3) Current into device pins is defined as positive. Current out of a device pin is defined as negative. Voltages are referenced to ground
except V_OD and ΔV_OD, which are differential voltages.
(4) PDB is specified to 3.3 V LVCMOS only and must be driven or pulled up to V_DD33 or to V_DDIO ≥ 3.0 V.
(5) I_OS is not specified for an indefinite period of time. Do not hold in short circuit for more than 500 ms or part damage may result.
Copyright © 2013–2016, Texas Instruments Incorporated
Product Folder Links: DS90UB928Q-Q1
Submit Documentation Feedback
9