DS90UH926Q Datasheet, PDF (33/57 Pages) Texas Instruments – 720p 24-bit Color FPD-Link III Deserializer with HDCP

DS90UH926Q
ADD ADD Register
(dec) (hex) Name
9 0x09 SlaveID[1]
10 0x0A SlaveID[2]
11 0x0B SlaveID[3]
12 0x0C SlaveID[4]
13 0x0D SlaveID[5]
14 0x0E SlaveID[6]
Bit(s)
7:1
0
7:1
0
7:1
0
7:1
0
7:1
0
7:1
0
Register
Type
RW
RW
RW
RW
RW
RW
Default Function Descriptions
(hex)
0x00
Target
Slave
Device ID1
7-bit Remote Slave Device ID 1
Configures the physical I2C address of the remote I2C
Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID1, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
Reserved
0x00
Target
Slave
Device ID2
7-bit Remote Slave Device ID 2
Configures the physical I2C address of the remote I2C
Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID2, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
Reserved
0x00
Target
Slave
Device ID3
7-bit Remote Slave Device ID 3
Configures the physical I2C address of the remote I2C
Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID3, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
Reserved
0x00
Target
Slave
Device ID4
7-bit Remote Slave Device ID 4
Configures the physical I2C address of the remote I2C
Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID4, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
Reserved
0x00
Target
Slave
Device ID5
7-bit Remote Slave Device ID 5
Configures the physical I2C address of the remote I2C
Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID5, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
Reserved
0x00
Target
Slave
Device ID6
7-bit Remote Slave Device ID 6
Configures the physical I2C address of the remote I2C
Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID6, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
Reserved
Copyright © 1999-2012, Texas Instruments Incorporated
33