DAC8562SDSCT Datasheet, PDF (26/58 Pages) Texas Instruments – DUAL 16-/14-/12-BIT, ULTRALOW-GLITCH, LOW-POWER, BUFFERED, VOLTAGE-OUTPUT DAC WITH 2.5-V, 4-PPM/°C INTERNAL REFERENCE IN SMALL 3-MM × 3-MM SON

DAC8562, DAC8563
DAC8162, DAC8163
DAC7562, DAC7563
SLAS719D – AUGUST 2010 – REVISED AUGUST 2012
THEORY OF OPERATION
www.ti.com
DIGITAL-TO-ANALOG CONVERTER (DAC)
The DAC756x, DAC816x, and DAC856x architecture consists of two string DACs, each followed by an output
buffer amplifier. The devices include an internal 2.5-V reference with 4-ppm/°C temperature drift performance.
Figure 88 shows a principal block diagram of the DAC architecture.
Gain
Register
V_REFIN/
V_REFOUT
150 kW
150 kW
D_{IN n}
DAC
Register
REF(+)
Resistor String
REF(-)
V_OUT
GND
Figure 88. DAC Architecture
The input coding to the DAC756x, DAC816x, and DAC856x is straight binary, so the ideal output voltage is given
by Equation 1:
V_{O UT}
=
æ
çè
D_IN
2ⁿ
ö
÷ø
´
V_REF
´ Gain
(1)
where:
n = resolution in bits; either 12 (DAC756x), 14 (DAC816x) or 16 (DAC856x)
D_IN = decimal equivalent of the binary code that is loaded to the DAC register. D_IN ranges from 0 to 2ⁿ – 1.
V_REF = DAC reference voltage; either V_REFOUT from the internal 2.5-V reference or V_REFIN from an
aaa external reference.
Gain = 1 by default when internal reference is disabled (using external reference), and gain = 2 by default
aaa when using internal reference. Gain can also be manually set to either 1 or 2 using the gain register.
aaa See the GAIN REGISTERS section for more information.
26
Submit Documentation Feedback
Copyright © 2010–2012, Texas Instruments Incorporated
Product Folder Links: DAC8562 DAC8563 DAC8162 DAC8163 DAC7562 DAC7563