DS90UR910Q_14 Datasheet, PDF (19/31 Pages) Texas Instruments – 10 - 75 MHz 24-bit Color FPD-Link II to CSI-2 Converter

DS90UR910Q
www.ti.com
SNLS414C – JUNE 2012 – REVISED MAY 2013
Table 4. CSI-2 Data Format with FPD-Link II Serializers (18-bit mode)
FPD-Link II (18-bit)
pin name
DIN[0]
DIN[1]
DIN[2]
DIN[3]
DIN[4]
DIN[5]
DIN[6]
DIN[7]
DIN[8]
DIN[9]
DIN[10]
DIN[11]
DIN[12]
DIN[13]
DIN[14]
DIN[15]
DIN[16]
DIN[17]
DIN[18]
DIN[19]
DIN[20]
RGB Data bits
R[0]
R[1]
R[2]
R[3]
R[4]
R[5]
G[0]
G[1]
G[2]
G[3]
G[4]
G[5]
B[0]
B[1]
B[2]
B[3]
B[4]
B[5]
HS
VS
DE
CSI-2 RGB888
Data bits
R[0]
R[1]
R[2]
R[3]
R[4]
R[5]
R[6]
R[7]
G[0]
G[1]
G[2]
G[3]
G[4]
G[5]
G[6]
G[7]
B[0]
B[1]
B[2]
B[3]
B[4]
B[5]
B[6]
B[7]
SERIAL CONTROL BUS (CCI/I2C)
The DS90UR910Q can be configured by the use of the CCI (Camera Control Interface), which is a bi-directional,
half-duplex, serial control bus consists of SDA and SCL. The SDA is the bi-directional data line. The SCL is the
serial clock line. Both SCL and SDA are driven by open drain drivers and required external pull-up resistors to
VDDIO. The signals are either driven low or pulled high.
The DS90UR910Q is a CCI slave. ID[1:0] pins select one of the four CCI slave addresses (see Table 5).
ID[1]
0
0
1
1
ID[0]
0
1
0
1
Table 5. CCI/I2C Slave Address
7-bit slave address
011 1100 (0x3C’h)
011 1101 (0x3D’h)
011 0110 (0x36’h)
011 0111 (0x37’h)
8-bit slave address (0 appended WRITE)
0111 1000 (0x78’h)
0111 1010 (0x7A’h)
0110 1100 (0x6C’h)
0110 1110 (0x6E’h)
Copyright © 2012–2013, Texas Instruments Incorporated
Product Folder Links: DS90UR910Q
Submit Documentation Feedback
19