DS90UR910Q_14 Datasheet, PDF (1/31 Pages) Texas Instruments – 10 - 75 MHz 24-bit Color FPD-Link II to CSI-2 Converter

DS90UR910Q
www.ti.com
SNLS414C – JUNE 2012 – REVISED MAY 2013
DS90UR910Q 10 - 75 MHz 24-bit Color FPD-Link II to CSI-2 Converter
Check for Samples: DS90UR910Q
FEATURES
1
•23 10 – 75 MHz PCLK Support (280 Mbps – 2.10
Gbps FPD-Link II Linerate)
• Compatible to DC Balanced, AC Ccoupled for
FPD-Link II Serial Bit Stream
• Capable to Recover Data up to 10 Meters STP
Cable
• MIPI D-PHY Modules Conform to v1.00.00
• Compatible with MIPI CSI-2 Version 1.01
• Supports Data Rate up to 900Mbps per Data
Lane, with Two Lanes
• Video Stream Packet Formats: RGB888
• Continuous and Non-Continuous Clocking
Mode
• Ultra Low Power, Escape, High Speed, and
Control Modes Support
• Integrated Input Terminations and Adjustable
Receive Equalization
• Fast Random Lock; No Reference Clock
Required
• CCI/I2C Compatible Control Bus
• @Speed BIST and Reporting Pin
• Single +1.8V Power Supply
• 1.8V or 3.3V Compatible LVCMOS I/O Interface
• Automotive Grade Product: AEC-Q100 Grade 2
Qualified
• 8 kV ISO 10605 ESD Rating
• Lead-less WQFN-40 Package (6mm x 6mm)
DESCRIPTION
The DS90UR910Q is an interface bridge chip that
recovers data from the FPD-Link II serial bit stream
and converts into a Camera Serial Interface (CSI-2)
format compatible with Mobile Industry Processor
Interface (MIPI) specifications. It recovers the 24- or
18-bit RGB data and 3 video sync-signals from the
serial bit stream compatible to FPD-Link II serializers.
The recovered data is packetized and serialized over
two data lanes strobed by a half-rate serial clock
compliant with the MIPI DPHY / CSI-2 specifications,
each running up to 900 Mbps. The FPD-Link II
receiver supports pixel clocks of up to 75 MHz. The
CSI-2 output serial bus greatly reduces the
interconnect and signal count to a graphic processing
unit (GPU) and eases system designs for video
streams from multiple automotive driver assist
cameras.
The DS90UR910Q is available in a 40-lead WQFN
package. Electrical performance is qualified for
automotive AEC-Q100 grade 2 temperature range -
40°C to +105°C.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
TRI-STATE is a registered trademark of National Semiconductor Corporation.
2
All other trademarks are the property of their respective owners.
3
PRODUCT PREVIEW information concerns products in the
formative or design phase of development. Characteristic data and
other specifications are design goals. Texas Instruments reserves
the right to change or discontinue these products without notice.
Copyright © 2012–2013, Texas Instruments Incorporated