SLDS145B Datasheet, PDF (6/29 Pages) Texas Instruments – TFP410 TI PanelBus DIGITAL TRANSMITTER

TFP410
TI PanelBus™ DIGITAL TRANSMITTER
SLDS145B − OCTOBER 2001 − REVISED MAY 2011
absolute maximum ratings over operating free-air temperature (unless otherwise noted)^†
Supply voltage range, DV_DD, PV_DD, TV_DD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 4 V
Input voltage, logic/analog signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 4 V
External DVI single-ended termination resistance, R_T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 Ω to open circuit
External TFADJ resistance, R_TFADJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 Ω to open circuit
Storage temperature range, T_STG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
Case temperature for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
ESD protection, DVI pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 kV Human body model
ESD protection, all other pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 kV Human body model
JEDEC latch-up (EIA/JESD78) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA
† _{Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and}
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
recommended operating conditions
Supply voltage, V_DD (DV_DD, PV_DD, TV_DD)
Input reference voltage, V_REF
Low-swing mode
High-swing mode
DVI termination supply voltage, AV_DD (see Note 1)
DVI receiver
DVI Single-ended termination resistance, R_T (see Note 2)
DVI receiver
TFADJ resistor for DVI-compliant V_(SWING) range, R_(TFADJ)
400 mV = V_(SWING) = 600 mV
Operating free-air temperature range, T_A
‡ _{VDDQ defines the maximum low-level input voltage, it is not an actual input voltage.}
NOTES: 1. AV_DD is the termination supply voltage of the DVI link.
2. R_T is the single-ended termination resistance at the receiver end of the DVI link.
MIN
NOM MAX UNIT
3.0
3.3
3.6 V
0.55 V_DDQ/2^‡
0.9 V
DV_DD
V
3.14
3.3 3.46 V
45
50
55 Ω
505
510 515 Ω
0
25
70 °C
6
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265