English
Language : 

CC3200MOD_15 Datasheet, PDF (54/66 Pages) Texas Instruments – CC3200MOD SimpleLink™ Wi-Fi® and Internet-of-Things Module Solution, a Single-Chip Wireless MCU
CC3200MOD
SWRS166 – DECEMBER 2014
www.ti.com
6.3.3 Transmission Line
The RF signal from the device is routed to the antenna using a CPW-G (Coplanar Waveguide with
ground) structure. This structure offers the maximum isolation across filter gap and the best possible
shielding to the RF lines. In addition to the ground on the L1 layer, placing GND vias along the line also
provides additional shielding
Figure 6-3. Coplanar Waveguide (Cross Section) with GND and Via Stitching
S
W
Figure 6-4. CPW with GND (Top View)
54
Applications, Implementation, and Layout
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated