CC3200MOD_15 Datasheet, PDF (52/66 Pages) Texas Instruments – CC3200MOD SimpleLink™ Wi-Fi® and Internet-of-Things Module Solution, a Single-Chip Wireless MCU

CC3200MOD
SWRS166 – DECEMBER 2014
6.2 Bill of Materials(1)
QUANTITY
PART
REFERENCE
VALUE
1
U1
CC3200MOD
MANUFACTURER
Texas Instruments
1
E1
2.45-GHz Ant
Taiyo Yuden
1
C2
1.0 pF
Murata Electronics North
America
1
L1
3.6 nH
Murata Electronics North
America
(1) Resistors are not shown here. Any resistor of 5% tolerance can be used.
6.3 Layout Recommendations
6.3.1 RF Section (Placement and Routing)
www.ti.com
PART NUMBER
CC3200MODR1M2AMOB
AH316M245001-T
GJM1555C1H1R0BB01D
LQP15MN3N6B02D
DESCRIPTION
SimpleLink Wi-Fi MCU
Module
ANT Bluetooth WLAN
ZigBee^® WIMAX
CAP CER 1 pF 50 V
NP0 0402
INDUCTOR 3.6 NH
0.1 NH 0402
Figure 6-2. RF Section Layout
Being wireless device, the RF section gets the top priority in terms of layout. It is very important for the RF
section to be laid out correctly to get the optimum performance from the device. A poor layout can cause
low output power, EVM degradation, sensitivity degradation and mask violations.
52
Applications, Implementation, and Layout
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated