CC3200MOD_15 Datasheet, PDF (26/66 Pages) Texas Instruments – CC3200MOD SimpleLink™ Wi-Fi® and Internet-of-Things Module Solution, a Single-Chip Wireless MCU

CC3200MOD
SWRS166 – DECEMBER 2014
www.ti.com
Pin Internal Pullup and Pulldown (25°C)⁽¹⁾
PARAMETER
TEST CONDITIONS
MIN
NOM
MAX
UNIT
I_OH
Pullup current, V_OH = 2.4
(VDD = 3.0 V)
5
10
µA
I_OL
Pulldown current, V_OL = 0.4
5
µA
(VDD = 3.0 V)
(1) TI recommends using the lowest possible drive strength that is adequate for the applications. This recommendation minimizes the risk of
interference to WLAN radio and mitigates any potential degradation of RF sensitivity and performance. The default drive-strength setting
is 6 mA.
4.7 Thermal Resistance Characteristics for MOB Package
NAME
DESCRIPTION
°C/W ^{(1) (2)}
AIR FLOW (m/s)⁽³⁾
RΘ_JC
RΘ_JB
RΘ_JA
RΘ_JMA
Psi_JT
Psi_JB
Junction-to-case
Junction-to-board
Junction-to-free air
Junction-to-moving air
Junction-to-package top
Junction-to-board
9.08
10.34
11.60
5.05
9.08
10.19
0.00
0.00
0.00
< 1.00
0.00
0.00
(1) °C/W = degrees Celsius per watt.
(2) These values are based on a JEDEC-defined 2S2P system (with the exception of the Theta JC [RΘ_JC] value, which is based on a
JEDEC-defined 1S0P system) and will change based on environment as well as application. For more information, see these
EIA/JEDEC standards:
• JESD51-2, Integrated Circuits Thermal Test Method Environmental Conditions - Natural Convection (Still Air)
• JESD51-3, Low Effective Thermal Conductivity Test Board for Leaded Surface Mount Packages
• JESD51-7, High Effective Thermal Conductivity Test Board for Leaded Surface Mount Packages
• JESD51-9, Test Boards for Area Array Surface Mount Package Thermal Measurements
Power dissipation of 2 W and an ambient temperature of 70ºC is assumed.
(3) m/s = meters per second.
4.8 Reset Requirement
PARAMETER
SYMBOL
MIN
Operation mode level
Shutdown mode level⁽¹⁾
ViH
ViL
0
Minimum time for nReset low for resetting the
5
module
Rise/fall times
Tr/Tf
(1) The nRESET pin must be held below 0.6 V for the module to register a reset.
TYP
0.65 × VBAT
0.6 V
MAX
20
UNIT
V
V
ms
µs
26
Specifications
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated