CC430F5125 Datasheet, PDF (44/118 Pages) Texas Instruments – MSP430 SoC With RF Core

CC430F614x
CC430F514x
CC430F512x
ECCN 5E002 TSPA - Technology / Software Publicly Available
SLAS555A – NOVEMBER 2012 – REVISED FEBRUARY 2013
www.ti.com
Low-Power Mode With LCD Supply Currents (Into V_CC) Excluding External Current
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)^{(1) (2)}
PARAMETER
Temperature (T_A)
V_CC PMMCOREVx
-40°C
25°C
60°C
85°C
UNIT
TYP MAX TYP MAX TYP MAX TYP MAX
Low-power mode 3
0
3.1
I_LPM3
(LPM3) current, LCD 4-
1
3.2
LCD,
mux mode, internal
3.0 V
int. bias
biasing, charge pump
disabled^{(3) (4)}
2
3.3
3
3.3
3.3 4.0 4.3
3.4
4.5
3.5
4.7
3.5 4.3 4.8
5.8 7.4
6.2
µA
6.5
6.7 8.9
0
4.0
2.2 V
1
4.1
I_LPM3
LCD,CP
Low-power mode 3
(LPM3) current, LCD 4-
mux mode, internal
biasing, charge pump
enabled^{(3) (5)}
3.0 V
2
0
1
4.2
4.2
4.3
µA
2
4.5
3
4.5
(1) All inputs are tied to 0 V or to V_CC. Outputs do not source or sink any current.
(2) The currents are characterized with a Micro Crystal MS1V-T1K crystal with a load capacitance of 12.5 pF. The internal and external load
capacitance are chosen to closely match the required 12.5 pF.
(3) Current for watchdog timer and RTC clocked by ACLK included. ACLK = low frequency crystal operation (XTS = 0, XT1DRIVEx = 0).
CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 0 (LPM3); f_ACLK = 32768 Hz, f_MCLK = f_SMCLK = f_DCO = 0 MHz
Current for brownout, high-side supervisor (SVS_H) normal mode included. Low-side supervisor and monitors disabled (SVS_L, SVM_L).
High side monitor disabled (SVM_H). RAM retention enabled.
(4) LCDMx = 11 (4-mux mode), LCDREXT=0, LCDEXTBIAS=0 (internal biasing), LCD2B=0 (1/3 bias), LCDCPEN=0 (charge pump
disabled), LCDSSEL=0, LCDPREx=101, LCDDIVx=00011 (f_LCD = 32768 Hz/32/4 = 256 Hz)
Even segments S0, S2,...=0, odd segments S1, S3,...=1. No LCD panel load.
(5) LCDMx = 11 (4-mux mode), LCDREXT=0, LCDEXTBIAS=0 (internal biasing), LCD2B=0 (1/3 bias), LCDCPEN = 1 (charge pump
enabled), VLCDx = 1000 (V_LCD= 3 V typ.), LCDSSEL=0, LCDPREx=101, LCDDIVx=00011 (f_LCD = 32768 Hz/32/4 = 256 Hz)
Even segments S0, S2,...=0, odd segments S1, S3,...=1. No LCD panel load.
44
Submit Documentation Feedback
Copyright © 2012–2013, Texas Instruments Incorporated