CC430F5125 Datasheet, PDF (12/118 Pages) Texas Instruments – MSP430 SoC With RF Core

CC430F614x
CC430F514x
CC430F512x
ECCN 5E002 TSPA - Technology / Software Publicly Available
SLAS555A – NOVEMBER 2012 – REVISED FEBRUARY 2013
www.ti.com
Table 3. CC430F614x Terminal Functions (continued)
TERMINAL
NAME
RST/NMI/ SBWTDIO
DVCC
AVSS
P5.1/ XOUT
P5.0/ XIN
AVCC
P2.7/ PM_ADC10CLK/
PM_DMAE0/ CB7 (/A7)
P2.6/ PM_ACLK/ CB6 (/A6)
P2.5/ PM_SVMOUT/ CB5
(/A5/ VREF+/ VeREF+)
P2.4/ PM_RTCCLK/ CB4
(/A4/ VeREF-)
P2.3/ PM_TA1CCR2A/ CB3 (/A3)
P2.2/ PM_TA1CCR1A/ CB2 (/A2)
P2.1/PM_TA1CCR0A/CB1(/A1)
P2.0/ PM_CBOUT1/ PM_TA1CLK/
CB0 (/A0)
VSS - Exposed die attach pad
I/O ⁽¹⁾
NO.
DESCRIPTION
Reset input active low
51 I/O Non-maskable interrupt input
Spy-bi-wire data input/output
52
Digital power supply
53
Analog ground supply for ADC10
54
I/O
General-purpose digital I/O
Output terminal of crystal oscillator XT1
55
I/O
General-purpose digital I/O
Input terminal for crystal oscillator XT1
56
Analog power supply
General-purpose digital I/O with port interrupt and mappable secondary function
57
I/O
Default mapping: ADC10CLK output; DMA external trigger input
Comparator_B input CB7
Analog input A7 - 10-bit ADC
General-purpose digital I/O with port interrupt and mappable secondary function
58
I/O
Default mapping: ACLK output
Comparator_B input CB6
Analog input A6 - 10-bit ADC
General-purpose digital I/O with port interrupt and mappable secondary function
Default mapping: SVM output
Comparator_B input CB5
59 I/O Analog input A5 - 10-bit ADC
Output of reference voltage to the ADC
Positive terminal for the ADC reference voltage for both sources, the internal reference
voltage, or an external applied reference voltage
General-purpose digital I/O with port interrupt and mappable secondary function
Default mapping: RTCCLK output
60
I/O
Comparator_B input CB4
Analog input A4 - 10-bit ADC
Negative terminal for the ADC reference voltage for an external applied reference
voltage
General-purpose digital I/O with port interrupt and mappable secondary function
61
I/O
Default mapping: TA1 CCR2 compare output or capture input
Comparator_B input CB3
Analog input A3 - 10-bit ADC
General-purpose digital I/O with port interrupt and mappable secondary function
62
I/O
Default mapping: TA1 CCR1 compare output or capture input
Comparator_B input CB2
Analog input A2 - 10-bit ADC
General-purpose digital I/O with port interrupt and mappable secondary function
63
I/O
Default mapping: TA1 CCR0 compare output or capture input
Comparator_B input CB1
Analog input A1 - 10-bit ADC
General-purpose digital I/O with port interrupt and mappable secondary function
64
I/O
Default mapping: Comparator_B output; TA1 clock input
Comparator_B input CB0
Analog input A0 - 10-bit ADC
Ground supply
The exposed die attach pad must be connected to a solid ground plane as this is
the ground connection for the chip.
12
Submit Documentation Feedback
Copyright © 2012–2013, Texas Instruments Incorporated