LSM6DS3H Datasheet, PDF (84/104 Pages) STMicroelectronics – always-on 3D accelerometer and 3D gyroscope

Register description
LSM6DS3H
Table 192. MD1_CFG register description
INT1_FF
Routing of free-fall event on INT1. Default value: 0
(0: routing of free-fall event on INT1 disabled;
1: routing of free-fall event on INT1 enabled)
Routing of tap event on INT1. Default value: 0
INT1_DOUBLE
_TAP
(0: routing of double-tap event on INT1 disabled;
1: routing of double-tap event on INT1 enabled)
INT1_6D
Routing of 6D event on INT1. Default value: 0
(0: routing of 6D event on INT1 disabled; 1: routing of 6D event on INT1 enabled)
INT1_TILT
Routing of tilt event on INT1. Default value: 0
(0: routing of tilt event on INT1 disabled; 1: routing of tilt event on INT1 enabled)
INT1_TIMER
Routing of end counter event of timer on INT1. Default value: 0
(0: routing of end counter event of timer on INT1 disabled;
1: routing of end counter event of timer event on INT1 enabled)
9.79
MD2_CFG (5Fh)
Functions routing on INT2 register (r/w).
INT2_
INACT_
STATE
INT2_
SINGLE_
TAP
Table 193. MD2_CFG register
INT2_
INT2_WU INT2_FF DOUBLE_ INT2_6D
TAP
INT2_TILT
INT2_
IRON
Table 194. MD2_CFG register description
INT2_INACT_ Routing on INT2 of inactivity mode. Default: 0
STATE
(0: routing on INT2 of inactivity disabled; 1: routing on INT2 of inactivity enabled)
Single-tap recognition routing on INT2. Default: 0
INT2_SINGLE_
TAP
(0: routing of single-tap event on INT2 disabled;
1: routing of single-tap event on INT2 enabled)
INT2_WU
Routing of wakeup event on INT2. Default value: 0
(0: routing of wakeup event on INT2 disabled;
1: routing of wake-up event on INT2 enabled)
INT2_FF
Routing of free-fall event on INT2. Default value: 0
(0: routing of free-fall event on INT2 disabled;
1: routing of free-fall event on INT2 enabled)
Routing of tap event on INT2. Default value: 0
INT2_DOUBLE
_TAP
(0: routing of double-tap event on INT2 disabled;
1: routing of double-tap event on INT2 enabled)
INT2_6D
Routing of 6D event on INT2. Default value: 0
(0: routing of 6D event on INT2 disabled; 1: routing of 6D event on INT2 enabled)
INT2_TILT
Routing of tilt event on INT2. Default value: 0
(0: routing of tilt event on INT2 disabled; 1: routing of tilt event on INT2 enabled)
INT2_IRON
Routing of soft-iron/hard-iron algorithm end event on INT2. Default value: 0
(0: routing of soft-iron/hard-iron algorithm end event on INT2 disabled;
1: routing of soft-iron/hard-iron algorithm end event on INT2 enabled)
84/104
DocID028370 Rev 4