LSM330 Datasheet, PDF (58/75 Pages) STMicroelectronics – Power-down and sleep modes

Register description
LSM330
8.50
SETT2 (7Bh)
Setting of threshold, peak detection and flags for state machine 2 motion detection
operation register (r/w).
P_DET THR3_SA ABS
Table 89. SETT2 register
-
-
THR3_MA R_TAM SITR
P_DET
THR3_SA
ABS
THR3_MA
R_TAM
SITR
Table 90. SETT2 register description
SM2 peak detection. Default value: 0
0 = peak detection disabled, 1 = peak detection enabled
Default value: 0
0 = no action, 1 = Threshold 3 limit value for axis and sign mask reset (MASKB_2)
Default value: 0
0 = unsigned thresholds, 1 = signed thresholds
Default value: 0
0 = no action, 1 = Threshold 3 limit value for axis and sign mask reset (MASKA_2)
Next condition validation flag. Default value: 0
0 = no valid next condition found, 1 = valid next condition found and reset
Default value: 0
0 = no actions, 1 = program flow can be modified by STOP and CONT commands
8.51
PR2 (7Ch)
Program and reset pointer for state machine 2 motion-detection operation register (r/w).
PP3 PP2
Table 91. PR2 register
PP1
PP0
RP3
RP2
RP1 RP0
PP [3:0]
RP [3:0]
Table 92. PR2 register description
SM2 program pointer address.Default value: 0
SM2 reset pointer address. Default value: 0
8.52
TC2 (7Dh-7E)
16-bit general timer (unsigned output value) for state machine 2 operation timing register (r).
Table 93. TC2_L default values
0
0
0
0
0
0
0
0
Table 94. TC2_H default values
0
0
0
0
0
0
0
0
58/75
DocID023426 Rev 3