LSM330 Datasheet, PDF (46/75 Pages) STMicroelectronics – Power-down and sleep modes

Register description
8.6
STATUS_REG_A (27h)
Linear acceleration sensor status register (r).
ZYXOR
ZOR
Table 28. STATUS_REG_A register
YOR
XOR
ZYXDA
ZDA
LSM330
YDA
XDA
8.7
8.8
ZYXOR
ZOR
YOR
XOR
ZYXDA
ZDA
YDA
XDA
Table 29. STATUS_REG_A register description
X-, Y- and Z-axis data overrun. Default value: 0
0 = no overrun has occurred; 1 = a new set of data has overwritten the previous data
Z-axis data overrun. Default value: 0
0 = no overrun has occurred; 1 = a new set of data for the Z-axis has overwritten the
previous data.
Y-axis data overrun. Default value: 0
0 = no overrun has occurred;
1 = new data for the Y-axis has overwritten the previous data
X-axis data overrun. Default value: 0
0 = no overrun has occurred;
1 = new data for the X-axis has overwritten the previous data
X-, Y- and Z-axis new data available. Default value: 0
0 = a new set of data is not yet available; 1 = a new set of data is available
Z-axis new data available. Default value: 0
0 = new data for the Z-axis is not yet available;
1 = new data for the Z-axis is available
Y-axis new data available. Default value: 0
0 = new data for the Y-axis is not yet available;
1 = new data for the Y-axis is available
X-axis new data available. Default value: 0
0 = new data for the X-axis is not yet available;
1 = new data for the X-axis is available
OFF_X (10h)
Offset correction x-axis register, signed value (r/w).
Table 30. OFF_X default values
0
0
0
0
0
0
0
0
OFF_Y (11h)
Offset correction y-axis register, signed value (r/w).
Table 31. OFF_Y default values
0
0
0
0
0
0
0
0
46/75
DocID023426 Rev 3