LSM330 Datasheet, PDF (14/75 Pages) STMicroelectronics – Power-down and sleep modes

Module specifications
2
Module specifications
LSM330
2.1
Mechanical characteristics
@ Vdd = 3V, T = 25 °C unless otherwise noted ^(a)
Symbol
Table 3. Mechanical characteristics
Parameter
Test conditions
Min. Typ.⁽¹⁾ Max.
FS bit set to 000
LA_FS
Linear acceleration measurement
range⁽²⁾
FS bit set to 001
FS bit set to 010
FS bit set to 011
FS bit set to 100
Angular rate
G_FS _{measurement range(3)}
FS bit set to 00
FS bit set to 01
FS bit set to 10
FS bit set to 000
FS bit set to 001
LA_So Linear acceleration sensitivity
FS bit set to 010
FS bit set to 011
FS bit set to 100
FS = ±250 dps
G_So Angular rate sensitivity
FS = ±500 dps
FS = ±2000 dps
LA_TyOff
Linear acceleration typical zero-g
level offset accuracy⁽³⁾
FS bit set to 000
G_TyOff
Angular rate typical zero-rate
level⁽⁴⁾
FS = 250 dps
FS = 500 dps
FS = 2000 dps
Top Operating temperature range
±2.0
±4.0
±6.0
±8.0
±16.0
±250
±500
±2000
0.061
0.122
0.183
0.244
0.732
8.75
17.50
70
±60
±10
±15
±25
-40
+85
1. Typical specifications are not guaranteed.
2. Verified by wafer level test and measurement of initial offset and sensitivity.
3. Typical zero-g level offset value after MSL3 preconditioning.
4. Offset can be eliminated by enabling the built-in high-pass filter.
Unit
g
dps
mg/digit
mdps/
digit
mg
dps
°C
14/75
a. The product is factory calibrated at 3.0 V. The operational power supply range is from 2.4 V to 3.6 V.
DocID023426 Rev 3