SI5369 Datasheet, PDF (41/84 Pages) Silicon Laboratories – ANY-FREQUENCY PRECISION CLOCK MULTIPLIER/JITTER ATTENUATOR

Si5369
Register 24.
Bit
D7
D6
Name
Type
R
R
Reset value = 0011 1111
D5
D4
D3
D2
D1
D0
FOS4_MSK FOS3_MSK FOS2_MSK FOS1_MSK LOL_MSK
R
R/W
R/W
R/W
R/W
R/W
Bit
Name
Function
7:5 Reserved
4 FOS4_MSK FOS4_MSK.
Determines if the FOS4_FLG is used to in the generation of an interrupt. Writes to this
register do not change the value held in the FOS4_FLG register.
0: FOS4 alarm triggers active interrupt on INToutput (if INT_PIN = 1).
1: FOS4_FLG ignored in generating interrupt output.
3 FOS3_MSK FOS3_MSK.
Determines if the FOS3_FLG is used in the generation of an interrupt. Writes to this
register do not change the value held in the FOS3_FLG register.
0: FOS3 alarm triggers active interrupt on INT output (if INT_PIN = 1).
1: FOS3_FLG ignored in generating interrupt output.
2 FOS2_MSK FOS2_MSK.
Determines if the FOS2_FLG is used in the generation of an interrupt. Writes to this reg-
ister do not change the value held in the FOS2_FLG register.
0: FOS2 alarm triggers active interrupt on INT output (if INT_PIN = 1).
1: FOS2_FLG ignored in generating interrupt output.
1 FOS1_MSK FOS1_MSK.
Determines if the FOS1_FLG is used in the generation of an interrupt. Writes to this reg-
ister do not change the value held in the FOS1_FLG register.
0: FOS1 alarm triggers active interrupt on INT output (if INT_PIN = 1).
1: FOS1_FLG ignored in generating interrupt output.
0
LOL_MSK LOL_MSK.
Determines if the LOL_FLG is used in the generation of an interrupt. Writes to this regis-
ter do not change the value held in the LOL_FLG register.
0: LOL alarm triggers active interrupt on INT output (if INT_PIN = 1).
1: LOL_FLG ignored in generating interrupt output.
Rev. 1.0
41