RX110_16 Datasheet, PDF (47/108 Pages) Renesas Technology Corp – 32 MHz 32-bit RX MCUs, 50 DMIPS

RX110 Group
5. Electrical Characteristics
Table 5.4 DC Characteristics (2)
Conditions: 1.8 V ≤ VCC < 2.7 V, 1.8 V ≤ AVCC0 < 2.7 V, VSS = AVSS0 = 0 V, T_a = –40 to +105°C
Item
Symbol
Min.
Typ.
Max.
Unit
Schmitt trigger input Ports P16, P17, port PA6, port PB0
voltage
(5 V tolerant)
Ports P03, P05,
ports P14, P15,
ports P26, P27,
ports P30 to P32, P35,
ports P54, P55,
ports PA0, PA1, PA3, PA4,
ports PB1, PB3, PB5 to PB7,
ports PC0 to PC7,
ports PE0 to PE7,
ports PH0 to PH3, PH7,
RES#
All pins
All pins
Input voltage
(except for Schmitt
trigger input pins)
MD
XTAL (external clock input)
Ports P40 to P44, P46,
ports PJ6, PJ7
MD
XTAL (external clock input)
Ports P40 to P44, P46,
ports PJ6, PJ7
V_IH
VCC × 0.8
—
5.8
V
VCC × 0.8
—
VCC + 0.3
–0.3
—
∆V_T
VCC × 0.01
—
V_IH
VCC × 0.9
—
VCC × 0.8
—
VCC × 0.2
—
VCC + 0.3
V
VCC + 0.3
AVCC0 × 0.7
—
AVCC0 + 0.3
V_IL
–0.3
–0.3
–0.3
—
VCC × 0.1
—
VCC × 0.2
—
AVCC0 × 0.3
Test
Conditions
Table 5.5 DC Characteristics (3)
Conditions: 1.8 V ≤ VCC ≤ 3.6 V, 1.8 V ≤ AVCC0 ≤ 3.6 V, VSS = AVSS0 = 0 V, T_a = –40 to +105°C
Input leakage
current
Three-state
leakage current
(off-state)
Item
RES#, MD, port P35, port PH7
Ports for 5 V tolerant
Pins other than above
Symbol Min.
Typ.
Max. Unit Test Conditions
I_in
—
—
1.0
µA V_in = 0 V, VCC
I_TSI
—
—
—
1.0
µA V_in = 0 V, 5.8 V
—
1.0
V_in = 0 V, VCC
Input capacitance
All input pins
(except for port P16, port P35)
Port P16, port P35
C_in
—
—
15
pF V_in = 0 mV,
Frequency: 1 MHz,
—
—
30
T_a = 25°C
Table 5.6 DC Characteristics (4)
Conditions: 1.8 V ≤ VCC ≤ 3.6 V, 1.8 V ≤ AVCC0 ≤ 3.6 V, VSS = AVSS0 = 0 V, T_a = –40 to +105°C
Item
Symbol Min.
Typ.
Max. Unit Test Conditions
Input pull-up
resistor
All ports
(except for port P35, port PH7)
R_U
10
20
100
kΩ V_in = 0 V
R01DS0202EJ0120 Rev.1.20
Jul 29, 2016
Page 47 of 108