AN91267 Datasheet, PDF (36/62 Pages) Ramtron International Corporation – Getting Started with PSoC

Getting Started with PSoC® 4 BLE
3. Select Configure Master Settings and restore the values to the default settings, as shown in Figure 49.
Figure 49. CySmart Master Settings Configuration
4. Press the reset switch on the BLE Pioneer Kit to start BLE advertisements from your design.
5. On the CySmart Host Emulation Tool, click Start Scan. Your device name should appear in the Discovered devices list,
as shown in Figure 50.
Figure 50. CySmart Device Discovery
6. Select your device and click Connect to establish a BLE connection between the CySmart Host Emulation Tool and your
device, as shown in Figure 51.
Figure 51. CySmart Device Connection
www.cypress.com
Document No. 001-91267 Rev. *D
36