AN91267 Datasheet, PDF (16/62 Pages) Ramtron International Corporation – Getting Started with PSoC

Getting Started with PSoC® 4 BLE
4. Go to Project > Device Selector and select the device. If you are using a development kit, read the part number from the
kit or refer to the kit guide for the part number. You can right click on the device selector’s Devices tab area and click on
Select Default Device for PSoC 4200 BLE family to select CY8C4247LQI-BL483 device used on BLE Pioneer Kit as
shown in Figure 20.
Figure 20. Device Selection
5. Creating a new project generates a project folder with a baseline set of files. You can view these files in the Workspace
Explorer window, as Figure 21 shows. Open the project schematic file TopDesign.cysch by double-clicking it.
Figure 21. Opening TopDesign Schematic
6. In the project schematic, you can create analog, digital, and communication designs by dragging and dropping
Components and wiring them. For the current design, you need two Components, BLE and Pin, as Figure 17 shows.
www.cypress.com
Document No. 001-91267 Rev. *D
16