OXCF950_06 Datasheet, PDF (29/66 Pages) Oxford Semiconductor – low cost asynchronous 16-bit PC card or Compact Flash UART device

OXFORD SEMICONDUCTOR, INC.
OXCF950 rev B DATA SHEET
0xC3
configuration has the following properties:
0x41
• Index is 0x03
0x99
• READY signal is active, and configuration is for I/O and Memory mode.
0x01
• Nominal Vcc is set to be 5.0 volts.
0x55
• Requests 8 bytes of I/O space, starting at 0x03F8.
0xA3
• Level interrupts, interrupt sharing are supported.
0x60
• Any interrupt (IRQ0-15) can be used.
0xF8
0x03
• Maximum number of identical cards is set to 8.
0x07
0xB0
0xFF
0xFF
0x07
0x1B
CISTPL_CFTABLE_ENTRY This configuration is based on the previous configuration, except that it specifies the
0x05
I/O space can start anywhere.
0x04
0x08
0xA0
0x40
0x07
0xFF
CISTPL_END
DS-0027 Feb 06
External—Free Release
Page 29 of 66