LC89091JA Datasheet, PDF (5/30 Pages) ON Semiconductor – Digital Audio Interface Receiver

LC89091JA
7. Electrical Characteristics
7.1 Absolute Maximum Ratings
Table 7.1: Absolute Maximum Ratings at GND=0V
Parameter
Symbol
Conditions
Ratings
Unit
Maximum supply voltage
Input voltage
Output voltage
Storage ambient temperature
VDD max
VIN
VOUT
Tstg
7.1.1
7.1.2
7.1.3
-0.3 to 4.6
V
-0.3 to VDD max+0.3 (max.4.6Vp-p)
V
-0.3 to VDD max+0.3 (max.4.6Vp-p)
V
-55 to 125
C
Operating ambient temperature
Topr
-30 to 70
C
Maximum input/output current
IIN, IOUT
7.1.4
20
mA
7.1.1: VDD pin
7.1.2: SCL, SDA, RXIN, MPIO, XIN and SDIN pins
7.1.3: SDA, ERR, GPO, MPIO, MCKO, BCKO, LRCKO, DATAO and XOUT pins
7.1.4: Per input/output pin
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed,
damage may occur and reliability may be affected.
7.2 Allowable Operating Range
Parameter
Table 7.2: Recommended Operating Conditions at GND=0V
Symbol
Conditions
min
typ
Supply voltage
Input voltage range
Output load capacitance
Output load capacitance
Operating temperature
VDD
VIN
CL1
CL2
Vopr
7.2.1
7.2.2
7.2.3
7.2.4
3.0
3.3
0
-30
25
7.2.1: VDD pin
7.2.2: SCL, SDA, RXIN, MPIO, XIN and SDIN pins
7.2.3: MCKO pin
7.2.4: Output pins expect MCKO pin
max
Unit
3.6
V
3.6
V
20
pF
30
pF
70
C
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended
Operating Ranges limits may affect device reliability.
7.3 DC Characteristics
Table 7.3: DC Characteristics at Ta=-30 to 70C, VDD=3.0 to 3.6V, GND=0V
Parameter
Symbol
Conditions
min
max
Unit
Input, High
VIH
7-3-1
0.7 VDD
Input, Low
VIL
Input, High
VIH
7.3.2
2.0
Input, Low
VIL
Output, High
VOH
7.3.3
VDD-0.8
Output, Low
VOL
VDD Supply Current
IDD1
7.3.4
VDD Supply Current
IDD2
7.3.5
7.3.1: CMOS-compatible: XIN pin (while external clock inputs)
7.3.2: TTL-compatible: SCL, SDA, RXIN, MPIO and SDIN pins
7.3.3: IOH=-4mA, IOL=4mA: ERR, MCKO, BCKO, LRCKO, DATAO and XOUT output pins
IOH=-2mA, IOL=2mA: SDA and MPIO output pins
7.3.4: Input fs: 96kHz, MCKO: 512fs output status
7.3.5: "PDMODE=1"
V
0.2VDD
V
V
0.8
V
V
0.4
V
20
mA
2
A
No.A2172-5/30