|
LC89091JA Datasheet, PDF (14/30 Pages) ON Semiconductor – Digital Audio Interface Receiver | |||
|
◁ |
LC89091JA
8.6.4 Serial audio data input format (SDIN)
ï· The LC89091JA is provided with a serial data input pin of SDIN.
ï· The format of the serial audio data input to SDIN and the demodulation data output format must be identical.
ï· The SDIN data to be input must be synchronization with the BCKO and LRCKO clocks.
ï· The data input from the SDIN pin is through-output to the DATAO pin. Data format conversion cannot be performed.
ï· Normally, SDIN input data is output to DATAO pin when PLL is unlocked. But, with the ADMODE register setting,
the SDIN input data is output to DATAO regardless of the locked/unlocked status of the PLL.
ï· The SDIN pin must be connected to GND when it is not used.
SDIN
LRCKO
BCKO
DATAO
24bit
MSB
LSB
L-ch
24bit
MSB
LSB
R-ch
MSB
LSB
MSB
LSB
[ DAFORM=0 ] : I2S Data Input
SDIN
LRCKO
BCKO
DATAO
24bit
MSB
LSB
L-ch
24bit
MSB
LSB
R-ch
MSB
LSB
MSB
LSB
[ DAFORM=1 ] : MSB first Left-Justified Data Input
Figure 8.8: SDIN pin Data Input Timing
MSB
MSB
No.A2172-14/30
|
▷ |