English
Language : 

COP8AME9 Datasheet, PDF (81/83 Pages) National Semiconductor (TI) – 8-Bit CMOS Flash Microcontroller with 8k Memory, Dual Op Amps, Virtual EEROM, Temperature Sensor,10-Bit A/D and Brownout Reset
23.0 Development Support (Continued)
Vendor
Home Office
K and K
Kaergaardsvej 42 DK-8355
Development ApS
Solbjerg Denmark
Fax: +45-8692-8500
National
2900 Semiconductor Dr.
Semiconductor
Santa Clara, CA 95051
USA
Tel: 1-800-272-9959
Fax: 1-800-737-7018
SofTec Microsystems Via Roma, 1
33082 Azzano Decimo (PN)
Italy
Tel: +39 0434 640113
Fax: +39 0434 631598
Electronic Sites
www.kkd.dk kkd@kkd.dk
www.national.com/cop8
support@nsc.com
europe.support@nsc.com
info@softecmicro.com
www.softecmicro.com
support@softecmicro.com
Other Main Offices
Europe:
Tel: 49(0) 180 530 8585
Fax: 49(0) 180 530 8586
Hong Kong:
Distributors Worldwide
Germany:
Tel.:+49 (0) 8761 63705
France:
Tel: +33 (0) 562 072 954
UK:
Tel: +44 (0) 1970 621033
The following companies have approved COP8 programmers in a variety of configurations. Contact your vendor’s local office
or distributor and request a COP8FLASH update. You can link to their web sites and get the latest listing of approved
programmers at: www.national.com/cop8.
Advantech; BP Microsystems; Data I/O; Dataman; Hi-Lo Systems; KANDA, Lloyd Research; MQP; Needhams; Phyton; SofTec
Microsystems; System General; and Tribal Microsystems.
24.0 Revision History
Date
January 2002
April 2002
February 2004
Section
Forced Execution from
Boot ROM.
Timers
Development Support
Pin Descriptions
Reset
Power Saving Features
General
Electrical Specifications
RESET
Timers
Development Support
Added Figure.
Summary of Changes
Clarification on high speed PWM Timer use.
Updated with the latest support information.
Clarification of the functions of L4 and L6 for T2 and T3 PWM Output.
Addition of caution regarding rising edge on RESET with low VCC.
Description of modified function of ITMR Register.
Deleted references to COP8ANE9, COP8SDE9 and COP8CFE9 devices
which have been placed on Lifetime Buy. Removed temp range 7, −40˚C to
+125˚C
Updated A/D specifications to match production values
Eliminated references to non-brownout devices.
General update of electrical specifications.
Eliminated references to non-brownout devices.
Incorporated High Speed Timer/Port L interaction description from User
Information Sheet
Additional update to current support.
81
www.national.com