English
Language : 

COP8AME9 Datasheet, PDF (10/83 Pages) National Semiconductor (TI) – 8-Bit CMOS Flash Microcontroller with 8k Memory, Dual Op Amps, Virtual EEROM, Temperature Sensor,10-Bit A/D and Brownout Reset
7.0 Absolute Maximum Ratings (Note
1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage (VCC)
Voltage at Any Pin
Total Current into VCC Pin (Source)
7V
−0.3V to VCC +0.3V
200 mA
Total Current out of GND Pin (Sink)
Storage Temperature Range
ESD Protection Level
200 mA
−65˚C to +140˚C
2 kV (Human Body
Model)
Note 1: Absolute maximum ratings indicate limits beyond which damage to
the device may occur. DC and AC electrical specifications are not ensured
when operating the device at absolute maximum ratings.
8.0 Electrical Characteristics
DC Electrical Characteristics (−40˚C ≤ TA ≤ +85˚C)
Datasheet min/max specification limits are guaranteed by design, test, or statistical analysis.
Parameter
Conditions
Min
Typ
Operating Voltage
4.5
Power Supply Rise Time
10
Power Supply Ripple (Note 2)
Peak-to-Peak
Supply Current on VCC pin(Note 3)
High Speed Mode
CKI = 10 MHz
CKI = 3.33 MHz
Dual Clock Mode
VCC = 5.5V, tC = 0.5 µs
VCC = 4.5V, tC = 1.5 µs
CKI = 10 MHz, Low Speed OSC = 32 kHz
CKI = 3.33 MHz, Low Speed OSC = 32 kHz
Low Speed Mode
VCC = 5.5V, tC = 0.5 µs
VCC = 4.5V, tC = 1.5 µs
Low Speed OSC = 32 kHz
VCC = 5.5V
60
HALT Current with BOR Disabled (Test Mode
only)(Note 4)
High Speed Mode
VCC = 5.5V, CKI = 0 MHz
<1
Dual Clock Mode
VCC = 5.5V, CKI = 0 MHz,
<5
Low Speed OSC = 32 kHz
Low Speed Mode
VCC = 5.5V, CKI = 0 MHz,
<5
Low Speed OSC = 32 kHz
Idle Current on VCC pin (Note 3)
High Speed Mode
CKI = 10 MHz
CKI = 3.33 MHz
Dual Clock Mode
VCC = 5.5V, tC = 0.5 µs
VCC = 4.5V, tC = 1.5 µs
CKI = 10 MHz, Low Speed OSC = 32 kHz
CKI = 3.33 MHz, Low Speed OSC = 32 kHz
Low Speed Mode
VCC = 5.5V, tC = 0.5 µs
VCC = 4.5V, tC = 1.5 µs
Low Speed OSC = 32 kHz
Supply Current for BOR Feature
Brownout Trip Level
VCC = 5.5V
VCC = 5.5V
15
4.17
4.28
Input Levels (VIH, VIL)
Logic High
Logic Low
0.8 VCC
Internal Bias Resistor for the CKI
Crystal/Resonator Oscillator
0.3
1.0
Hi-Z Input Leakage
Input Pullup Current
Port Input Hysteresis
VCC = 5.5V
VCC = 5.5V, VIN = 0V
−0.5
−50
0.25 VCC
Max
5.5
50 x 106
0.1 VCC
Units
V
ns
V
14.5
mA
7
mA
14.5
mA
7
mA
103
µA
10
µA
17
µA
17
µA
2.5
mA
1.2
mA
2.5
mA
1.2
mA
30
µA
45
µA
4.5
V
V
0.16 VCC
V
2.5
MΩ
+0.5
µA
−210
µA
V
www.national.com
10