PIC18F23K20 Datasheet, PDF (366/420 Pages) Microchip Technology – 28/40/44-Pin Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology

PIC18F2XK20/4XK20
26.5 DC Characteristics: Primary Run Supply Current, PIC18F2XK20/4XK20
PIC18F2XK20/4XK20
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +125°C
Param
No.
Device Characteristics
Typ Max Units
Conditions
D012 Supply Current (IDD)^{(1, 2)} 0.5 — mA -40°C to +85°C
VDD = 1.8V
0.5 — mA -40°C to +125°C
D012A
0.8 — mA -40°C to +85°C
VDD = 3.0V
0.8 — mA -40°C to +125°C
FOSC = 1 MHz
(PRI_RUN,
EC oscillator)
D013
D013A
3.0 — mA -40°C to +85°C
VDD = 1.8V
3.0 — mA -40°C to +125°C
6.5 — mA -40°C to +85°C
VDD = 3.0V
6.5 — mA -40°C to +125°C
FOSC = 20 MHz
(PRI_RUN,
EC oscillator)
D014
D014A
14 — mA -40°C to +85°C
VDD = 1.8V
14 — mA -40°C to +125°C
18 — mA -40°C to +85°C
VDD = 3.0V
18 — mA -40°C to +125°C
FOSC = 64 MHz
(PRI_RUN,
EC oscillator)
D015
D015A
2.7 — mA -40°C to +85°C
VDD = 1.8V
2.7 — mA -40°C to +125°C
FOSC = 4 MHz
16 MHz Internal
5.2 — mA -40°C to +85°C _{VDD = 3.0V (PRI_RUN HS+PLL)}
5.2 — mA -40°C to +125°C
D016
D016A
14 — mA -40°C to +85°C
VDD = 1.8V
14 — mA -40°C to +125°C
FOSC = 16 MHz
64 MHz Internal
18 — mA -40°C to +85°C _{VDD = 3.0V (PRI_RUN HS+PLL)}
18 — mA -40°C to +125°C
Note 1:
2:
The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as
I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and tempera-
ture, also have an impact on the current consumption.
The test conditions for all IDD measurements in active operation mode are:
OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD;
MCLR = VDD; WDT enabled/disabled as specified.
For RC oscillator configurations, current through REXT is not included. The current through the resistor can
be estimated by the formula Ir = VDD/2REXT (mA) with REXT in kΩ.
DS41303B-page 364
Advance Information
© 2007 Microchip Technology Inc.