PIC24HJ32GP302_11 Datasheet, PDF (334/368 Pages) Microchip Technology – High-Performance, 16-bit Microcontrollers

PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04
29.2 AC Characteristics and Timing
Parameters
The information contained in this section defines
PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 and
PIC24HJ128GPX02/X04 AC characteristics and timing
parameters for high temperature devices. However, all
AC timing specifications in this section are the same as
those in Section 28.2 “AC Characteristics and
Timing Parameters”, with the exception of the
parameters listed in this section.
Parameters in this section begin with an H, which
denotes High temperature. For example, parameter
OS53 in Section 28.2 “AC Characteristics and
Timing Parameters” is the Industrial and Extended
temperature equivalent of HOS53.
TABLE 29-8: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +150°C for High Temperature
Operating voltage VDD range as described in Table 29-1.
FIGURE 29-1:
LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
Load Condition 1 – for all pins except OSC2
VDD/2
Load Condition 2 – for OSC2
RL
Pin
CL
VSS
Pin
CL
RL = 464Ω
CL = 50 pF for all pins except OSC2
VSS
15 pF for OSC2 output
TABLE 29-9: PLL CLOCK TIMING SPECIFICATIONS
AC
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
CHARACTERISTICS ^{Operating temperature -40°C ≤ TA ≤ +150°C for High Temperature}
Param
No.
HOS53
Note 1:
Symbol
Characteristic
DCLK
CLKO Stability (Jitter)⁽¹⁾
Min Typ Max Units
-5
0.5
5
%
These parameters are characterized, but are not tested in manufacturing.
Conditions
Measured over 100 ms
period
DS70293E-page 334
© 2011 Microchip Technology Inc.