PIC18F2455_09 Datasheet, PDF (323/438 Pages) Microchip Technology – 28/40/44-Pin,High-Performance,Enhanced Flash,USB Microcontrollers with nanoWatt Technology

PIC18F2455/2550/4455/4550
ANDWF
Syntax:
Operands:
Operation:
Status Affected:
Encoding:
Description:
Words:
Cycles:
Q Cycle Activity:
Q1
Decode
AND W with f
ANDWF f {,d {,a}}
0 ≤ f ≤ 255
d ∈ [0,1]
a ∈ [0,1]
(W) .AND. (f) → dest
N, Z
0001 01da ffff ffff
The contents of W are ANDed with
register ‘f’. If ‘d’ is ‘0’, the result is stored
in W. If ‘d’ is ‘1’, the result is stored back
in register ‘f’ (default).
If ‘a’ is ‘0’, the Access Bank is selected.
If ‘a’ is ‘1’, the BSR is used to select the
GPR bank (default).
If ‘a’ is ‘0’ and the extended instruction
set is enabled, this instruction operates
in Indexed Literal Offset Addressing
mode whenever f ≤ 95 (5Fh). See
Section 26.2.3 “Byte-Oriented and
Bit-Oriented Instructions in Indexed
Literal Offset Mode” for details.
1
1
Q2
Read
register ‘f’
Q3
Process
Data
Q4
Write to
destination
Example:
ANDWF
Before Instruction
W
REG
= 17h
= C2h
After Instruction
W
REG
= 02h
= C2h
REG, 0, 0
BC
Branch if Carry
Syntax:
Operands:
Operation:
Status Affected:
BC n
-128 ≤ n ≤ 127
if Carry bit is ‘1’,
(PC) + 2 + 2n → PC
None
Encoding:
Description:
Words:
Cycles:
1110 0010 nnnn nnnn
If the Carry bit is ‘1’, then the program
will branch.
The 2’s complement number ‘2n’ is
added to the PC. Since the PC will have
incremented to fetch the next
instruction, the new address will be
PC + 2 + 2n. This instruction is then a
two-cycle instruction.
1
1(2)
Q Cycle Activity:
If Jump:
Q1
Decode
No
operation
If No Jump:
Q1
Decode
Q2
Read literal
‘n’
No
operation
Q2
Read literal
‘n’
Q3
Process
Data
No
operation
Q3
Process
Data
Q4
Write to PC
No
operation
Q4
No
operation
Example:
HERE
Before Instruction
PC
=
After Instruction
If Carry
=
PC
=
If Carry
=
PC
=
BC 5
address (HERE)
1;
address (HERE + 12)
0;
address (HERE + 2)
© 2009 Microchip Technology Inc.
DS39632E-page 321