PIC16LC63A-04 Datasheet, PDF (123/184 Pages) Microchip Technology – 8-Bit CMOS Microcontrollers with A/D Converter

PIC16C63A/65B/73B/74B
16.2.2 TIMING CONDITIONS
The temperature and voltages specified in Table 16-1
apply to all timing specifications unless otherwise
noted. Figure 16-4 specifies the load conditions for the
timing specifications.
TABLE 16-1: TEMPERATURE AND VOLTAGE SPECIFICATIONS - AC
AC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature 0°C ≤ TA ≤ +70°C for commercial
-40°C ≤ TA ≤ +85°C for industrial
-40°C ≤ TA ≤ +125°C for extended
Operating voltage VDD range as described in DC spec Section 16.1.
LC parts operate for commercial/industrial temperatures only.
FIGURE 16-4:
LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
Load condition 1
Load condition 2
VDD/2
RL
Pin
CL
VSS
Pin
CL
RL = 464Ω
CL = 50 pF for all pins except OSC2/CLKOUT
VSS
but including D and E outputs as ports
CL = 15 pF for OSC2 output
Note 1: PORTD and PORTE are not implemented on the PIC16C63A/73B.
 2000 Microchip Technology Inc.
DS30605C-page 123