5968-4632E Datasheet, PDF (7/77 Pages) Keysight Technologies – Probing Solutions for Logic Analyzers

07 | Keysight | Probing Solutions for Logic Analyzers - Data Sheet
Probe Selection Guide for All Keysight Logic Analyzers (Continued)
U4200A Series direct-connect probes selection guide
Direct connect probes connect directly to the DUT and the 160-pin front panel connector of the compatible logic analyzers listed
below.
Logic analyzer compatibility
– U4164A, U4154A/B
– 16850A Series
Note: The U4206A is for use only with the U4164A when in quad sample state mode or ¼ channel timing mode.
Soft touch connectorless probes
Mictor probe
Model number
Application
Number of channels
Supported signal
types
Maximum data rate
Minimum signal
amplitude
Connection to
target system
Input capacitance
Additional supplies
Orderable as
U4206A (see note above) U4204A
Quick connection to many channels in a small footprint without
a header designed into the target system
34
34
32 data, 2 clock
32 data, 2 clock
Differential or single-ended Differential or single-ended
clock, single-ended data
clock, single-ended data
4 Gb/s
3.2 Gb/s
V_max – V_min
300 mV/200 mV ¹
V_max – V_min
200 mV
Requires Pro Series soft touch Requires Pro Series soft touch
footprint designed into the footprint designed into the
target
target
< 0.7 pF
< 0.7 pF
Kit of 5 additional retention Kit of 5 additional retention
modules
modules
E5403A
E5403A
U4205A
Quick connection to many
signals in a small footprint
34
32 data, 2 clock
Single-ended clock, single-
ended data
600 Mb/s
V_max – V_min
200 mV
Requires 38-pin Mictor
connector designed into the
target system
3.0 pF
See Table 1 for PC board
connectors and shrouds
1. 300 mV input required for data rates greater than 2.5 Gb/s.
General purpose flying lead
set
U4203A
Flexible connection to individual
signals
34
32 data, 2 clock
Differential or single-ended
clock, single-ended data
1.5 Gb/s
V_max – V_min
200 mV
Compatible with a wide
assortment of accessories to
connect to individual leads
< 0.9 pF
See Figure for additional leads
and grabbers