5968-4632E Datasheet, PDF (68/77 Pages) Keysight Technologies – Probing Solutions for Logic Analyzers

68 | Keysight | Probing Solutions for Logic Analyzers - Data Sheet
Probing Solutions for 40-pin Logic Analyzers
Mictor and Samtec Probing (Continued)
Support shrouds
A support shroud is recommended to
provide additional strain relief between
the probe and the connector, as shown
in Figures 9.27 and 9.29. Two plated
through-holes are required on the target
board. The shroud is mounted directly
to the target board using the through-
holes. This places the shroud around the
connector, providing solid mechanical
strain relief. Connector kits are available;
Table 1 shows the Keysight part numbers
for shrouds and connector kits for various
PC board thicknesses.
Table 7. Mating connectors, shrouds, and kits for Keysight E5339A,
E5346A, E5351A, and E5385A probes
For probe model
numbers
E5339A,
E5346A, E5351A
E5385A
Description
Kit of five support shrouds and five 38-pin Mictor connectors
for PC board thickness up to 1.57 mm (0.062”)
Kit of five support shrouds and five 38-pin Mictor connectors
for PC board thickness up to 3.175 mm (0.125”)
One 38-pin Mictor connector (also available from AMP as part
number 2-767004-2)
One support shroud for PC board thickness up to 1.57 mm
(0.062”)
One support shroud for PC board thickness up to 3.175 mm
(0.125”)
One support shroud for PC board thickness up to 4.318 mm
(0.700”)
Kit of five support shrouds and five 100-pin Samtec
connectors for PC board thickness up to 1.57 mm (0.062”)
Kit of five support shrouds and five 100-pin Samtec
connectors for PC board thickness up to 3.05 mm (0.120”)
One 100-pin Samtec connector (also available from Samtec as
part number ASP-65067-01)
One support shroud for PC board thickness up to 1.57 mm
(0.062”)
One support shroud for PC board thickness up to 3.05 mm
(0.120”)
Keysight part
number
E5346-68701
E5346-68700
1252-7431
E5346-44701
E5346-44704
E5346-44703
16760-68702
16760-68703
1253-3620
16760-02302
16760-02303
0.64
0.025
Figure 9.33. Mechanical information for E5346-44701, E5346-44703, E5346-44704 support shrouds for 38-pin Mictor connectors.