5968-4632E Datasheet, PDF (40/77 Pages) Keysight Technologies – Probing Solutions for Logic Analyzers

40 | Keysight | Probing Solutions for Logic Analyzers - Data Sheet
U4206A Probe, 34 Channel, Soft Touch Pro, Single-Ended, to Four 160-pin Direct
Connect to Logic Analyzer Front Panel Connectors
The U4206A is a direct connect probe/cable with a standard soft touch pro connector at
one end that routes to four 160-pin connectors that plug into the front panel connectors
of a U4164A logic analyzer module. The U4206A is routed to be used with either the
quad state mode or ¼ channel 10 GHz timing mode of the U4164A logic analyzer
module. For use in quad state mode only, the U4206A includes two flying leads to
connect additional clock qualifier signals into the clock inputs on Pods 3 and 7. Please
refer to the U4164A installation guide for specific details on the operation of the U4164A
quad sample state or ¼ channel 10 GHz timing modes of operation.
Figure 6.2. LPDDR4 example foot print mapping using U4206A Soft Touch Pro
probe/cable into U4164A.
Figure 6.1. Soft touch pro foot print mapping to U4164A pod/
channel inputs using U4206A probe/cable.