5968-4632E Datasheet, PDF (55/77 Pages) Keysight Technologies – Probing Solutions for Logic Analyzers

55 | Keysight | Probing Solutions for Logic Analyzers - Data Sheet
Probing Solutions for 40-pin Logic Analyzers
Soft Touch Connectorless Probing (Continued)
Retention module dimensions
The soft touch probes are attached to
the PC board using a retention module
which ensures pin-to-pad alignment
and holds the probe in place. A board
thickness of up to 2.54 mm (0.100 inch)
is recommended. Insert the retention
module into the board, noting the keying
pin, and solder the four alignment pins to
the backside of the board.
34-channel retention module dimensions
_4_.8_3__m_m_
0.190 in.
_6_.9_9__m_m_
0.275 in.
_0_.6_4__m_m_
0.025 in.
_4_.9_8__m_m_
0.196 in.
_3_4_.0_4__m_m_
1.340 in.
_2_9_.9_7__m_m_
1.180 in.
_4_.8_3__m_m_
0.190 in.
_6_.9_9__m_m_
0.275 in.
17-channel retention module dimensions
1_7_._9_8_m__m
0.708 in.
2_2_._0_5_m__m
0.868 in.
_3_.5_8__m_m_
0.141 in.
_2_.7_2__m_m_
0.107 in.
_3_.5_8__m_m_
0.141 in.
_4_.9_8__m_m_
0.196 in.
Figure 9.13. Retention module dimensions.
_2_.7_2__m_m_
0.107 in.
_0_._6_4_m__m_
0.025 in.
Probe and retention module
dimensions
The following dimensions show the soft
touch probe attached to the retention
module. The retention module is mounted
on the PC board.
34-channel probe and retention module dimensions
_2_5_.3_5__m_m_
0.998 in.
_2_.5_4__m_m_
0.100 in.
_8_.1_3__m_m_
0.320 in.
Minimum
recommended
_3_5_.0_5__m_m_
1.380 in.
Minimum
recommended
17-channel probe and retention module dimensions
_2_9_.6_1__m_m_
1.166 in.
_2_.5_4__m_m_
0.100 in.
_8_.1_3__m_m_
0.320 in.
Minimum
recommended
Figure 9.14. Side-by-side dimensions.
_2_3_.0_6__m_m_
0.908 in.
Minimum
recommended