5968-4632E Datasheet, PDF (34/77 Pages) Keysight Technologies – Probing Solutions for Logic Analyzers

34 | Keysight | Probing Solutions for Logic Analyzers - Data Sheet
Probing Solutions for 90-pin Logic Analyzers
Mictor and Samtec Probing
E5378A 100-pin single-ended probe
The E5378A is a 34-channel single-ended Samtec probe capable of capturing data up to
1.5 Gbits/sec (see Figures 4.31 and 4.33 for probe dimensions and equivalent load). The
probe has the following inputs:
– 32 single-ended data inputs, in two groups (pods) of 16.
– Two differential clock inputs. Either or both clock inputs can be acquired as data
inputs if not used as a clock.
– Two data threshold reference inputs, one for each pod (group of 16 data inputs).
E5379A 100-pin differential probe
The E5379A is a 17-channel differential Samtec probe capable of capturing data up to
1.5 Gbits/sec (see Figures 4.33 and 4.34 for probe dimensions and equivalent load). The
probe has the following inputs:
– 16 differential data inputs.
– One differential clock input.
– The clock input can be acquired as a data input if it is not used as a clock.
Refer to Table 4 on page 34 for part numbers for mating connectors and shrouds.
E5378A single-ended probe
Probing connector kit
Shrouds (5)
100-pin
connectors (5)
See Table 8 for part numbers
Figure 4.27. Keysight E5378A probe.
E5379A differential probe
Probing connector Kit
Shrouds (5)
100-pin
connectors (5)
Figure 4.28. Keysight E5379A probe.