5968-4632E Datasheet, PDF (5/77 Pages) Keysight Technologies – Probing Solutions for Logic Analyzers

05 | Keysight | Probing Solutions for Logic Analyzers - Data Sheet
Probe Selection Guide for All Keysight Logic Analyzers
Logic analyzer compatibility
– U4164A, U4154A/B
– 16850A Series
– 16962A, 16951B, 16950A/B
– 16760A, 16756A, 16755A, 16754A, 16753A
Note: U4201A logic analyzer cable(s) are required when using 90-pin probes with the U4164A, U4154A/B or 16850A Series logic analyzers.
Model number
Application
Number of channels
Supported signal
types
Maximum data rate
Minimum signal
amplitude
Connection to
target system
Input capacitance
Kit of 5 additional
retention modules
Number of probes
required per
U4201A cable
Soft touch connectorless probes
All soft touch probes are supplied with 5 retention modules
E5406A
E5398A
E5402A ¹
E5390A
Quick connection to many channels in a small footprint without a header designed into the target
17
34
34
16 data, 1 clock
32 data, 2 clocks
32 data, 2 clocks
Differential or single-ended clock single-ended data
4 Gb/s
250 mV _p-p
4 Gb/s
250 mV _p-p
4 Gb/s
250 mV _p-p
Requires half-size soft touch
footprint designed into the
target
< 0.7 pF
E5396-68702
Requires Pro Series soft touch
footprint designed into the
target
< 0.7 pF
E5403A
Requires original soft touch
footprint designed into the
target
< 0.7 pF
E5387-68701
1
1
1
E5405B
17
16 data, 1 clock
Differential or single-ended
clock and or data
4 Gb/s
V_max - V_min
200 mV
Requires Pro Series soft touch
footprint designed into the
target system
< 0.7 pF
E5403A
2
1. The E5402A Soft Touch Pro probe is a low profile right angle version of the E5406A above.