5968-4632E Datasheet, PDF (52/77 Pages) Keysight Technologies – Probing Solutions for Logic Analyzers

52 | Keysight | Probing Solutions for Logic Analyzers - Data Sheet
Probing Solutions for 40-pin Logic Analyzers
Soft Touch Connectorless Probing (Continued)
E5394A soft touch connectorless probe
The E5394A is a 34-channel single-ended soft touch connectorless probe compatible
with all Keysight logic analyzers that have a 40-pin pod connector. It is capable of
acquiring data at the maximum rates of the logic analyzer it is connected to. The probe
has the following inputs:
– 32 single-ended data inputs
– Two single-ended clock inputs
– < 0.7 pf input capacitance
– 500 mV p-p minimum signal amplitude
Unused clock inputs can be used as data inputs.
The E5394A (used with logic analyzers with a 40-pin pod connector) uses the same
footprint, pinout and retention module as the E5390A single-ended soft touch
connectorless probe (used with logic analyzers with a 90-pin pod connector).
A kit of five retention modules is shipped with each soft touch probe. Additional kits can
be ordered using Keysight part number E5387-68701.
E5396A half-size soft touch
connectorless probe
The E5396A is a small space saving
probe compatible with all Keysight
logic analyzers that have a 40-pin cable
connector. It is a 17-channel, single-
ended probe capable of capturing data at
the maximum rates of the logic analyzer
it is connected to. The probe has the
following inputs:
– 16 single-ended data inputs
– One single-ended clock input
– < 0.7 pf equivalent load capacitance
– 500 mV p-p minimum signal
amplitude
The unused clock input can be used as a
data input.
Logic analyzer probe cables
(40-pin pod connector)
The E5396A (used with logic analyzers
with a 40-pin cable connector) uses the
same footprint, pinout, and retention
module as the E5398A single-ended
soft touch connectorless probe (used
with logic analyzers with a 90-pin cable
connector).
E5394A
single-ended soft touch probe
Retention
module
Pads and mounting holes
on target system
Figure 9.8. Keysight E5394A soft touch probe connection.