5968-4632E Datasheet, PDF (62/77 Pages) Keysight Technologies – Probing Solutions for Logic Analyzers

62 | Keysight | Probing Solutions for Logic Analyzers - Data Sheet
Probing Solutions for 40-pin Logic Analyzers
Mictor and Samtec Probing
High-Density, High-Performance
Keysight has developed high-density probing solutions based on the 100-pin Samtec
and AMP Mictor 38-pin connectors. The Keysight probes and adapter cables, E5346A,
E5339A, E5351A, and E5385A, provide a connection strategy to route your important
signals to the Keysight logic analyzer. Simply design the connectors onto the board for
the critical signals such as address, data, and status bits. The connectors consume a
minimal amount of board space. Each connector provides 32 channels of logic analysis
per connector and two clocks (unused clocks can be used as data). Connectors for use
with the E5385A, E5346A, E5339A, and E5351A can be purchased directly from AMP,
Samtec, or Keysight. See the “Related Information” at the end of this document.
Figure 9.22. E5385A Samtec 100-pin probe mechanical dimensions.
0.450 in
11.44 mm
17.500 in
444.50 mm
0.465 in
11.80 mm
1.64 in
41.6 mm
2.393 in
60.77 mm
0.271 in
6.89 mm
1.400 in
35.56 mm
0.209 in
5.31 mm
1.100 in
27.94 mm
Figure 9.23. E5346A, E5351A, E5339A Mictor probes mechanical dimensions.