5968-4632E Datasheet, PDF (13/77 Pages) Keysight Technologies – Probing Solutions for Logic Analyzers

13 | Keysight | Probing Solutions for Logic Analyzers - Data Sheet
Probing Solutions for 90-pin Logic Analyzers
General-Purpose Probing (Continued)
Available accessories
Ground connector
It is essential to ground every tip that is in
use. For best performance at high speeds,
every tip should be grounded individually
to ground in the system under test.
Note: Examples of convenient connection which may result in degraded performance
Adapting to coaxial connectors
The Keysight E9638A probe tip to BNC
adapter can be used to connect one of
the flying lead probes of the E5382B to
a BNC connector. To probe other coaxial
connectors, use the E9638A adapter, a
BNC termination, and an adapter to the
other type of coaxial connector. Refer to
Figure 4.3.
Probe tip
Probe tip
Figure 4.2. 5063-2174 BNC to probe tip
adapter.
5063-2174 probe tip to
BNC adapter
5063-2174 probe tip to
BNC adapter
BNC 50 Ω feedthrough
termination adapter
BNC 50 Ω feedthrough
termination adapter
BNC connector
BNC to SMA, SMB, SMC, or
other coaxial adapter
SMA, SMB, SMC, or other
coaxial connector
Figure 4.3. Recommended configurations to probe RF coaxial connectors with the E5382B flying
lead probes.