5968-4632E Datasheet, PDF (41/77 Pages) Keysight Technologies – Probing Solutions for Logic Analyzers

41 | Keysight | Probing Solutions for Logic Analyzers - Data Sheet
U4206A Probe, 34 Channel, Soft Touch Pro, Single-Ended, to Four 160-pin Direct
Connect to Logic Analyzer Front Panel Connectors (Continued)
U4206A probe cable
Quick start and accessory guide
Socket adapter
3-pin header
Tip resistor
82 ohm coaxial
Kit of 34 pieces
E5381-82102
Kit of 34 pieces
E5381-82104
Figure 6.3. U4206A probe cable accessories.
Kit of 34 pieces
E5381-82101
34 channel, soft touch pro, single-ended,
quad x 160-pin direct connect
Soft touch pro
retention module
82 ohm resistor
template
Kit of 5 pieces
E5405-68702
1 piece
01131-94309
1
CONNECT PODS TO LOGIC
ANALYZER
U4206A
connector pod - to - LA connector
Pod 1
Pods 1/2
Pod 3
Pods 3/4
Pod 5
Pods 5/6
Pod 7
Pods 7/8
2
APPLY SOFT TOUCH PRO RETENTION
MODULE TO SYSTEM UNDER TEST
Insert
Solder pins from
top of board
3
CONNECT PROBE CABLE TO SOFT
TOUCH PRO RETENTION MODULE
Soft touch pro
probe cable
Retentio
module
CLOCK QUALIFIER CONNECTIONS ARE MADE USING THE INCLUDED ACCESSORIES
Coaxial tip resistor 82 Ohm
Solder attach To:
. _Components
. _Traces
. _Pads
. _VIAs
3-pin header
Socket adapter
Total lumped input C 0.9 pF
Total lumped input C 1.0 pF
Figure 6.4. U4206A connections and probe cable details.
Total lumped input C 1.1 pF
Logic analyzer
connection pods
PROBE CABLE ASSEMBLY
Clock qualifier connections
Soft touch pro
connector
Figure 6.5. U4206A probe cable.
Pin Protector
Extra E5390-25201 Pin
Protectors are included
DO NOT DISCARD THIS
PIN PROTECTOR
To protect the Soft
Touch Pro pins from
being damaged, use the
Pin Protector when
probe is not connected.