5968-4632E Datasheet, PDF (6/77 Pages) Keysight Technologies – Probing Solutions for Logic Analyzers

06 | Keysight | Probing Solutions for Logic Analyzers - Data Sheet
Probe Selection Guide for All Keysight Logic Analyzers (Continued)
Logic analyzer compatibility
– U4164A, U4154A/B
– 16850A Series
– 16962A, 16951B, 16950A/B
– 16760A, 16756A, 16755A, 16754A, 16753A
Note: U4201A logic analyzer cable(s) are required when using 90-pin probes with the U4164A, U4154A/B or 16850A Series logic analyzers.
Model number
Application
Number of
channels
Supported signal
types
Maximum data
rate
Minimum signal
amplitude
Connection to
target system
Samtec probes
Mictor probes
E5378A
E5379A
E5380B
Quick connection to many channels in a small footprint
34
17
34
32 data, 2 clocks
16 data, 1 clock
32 data, 2 clocks
Differential or
Differential or
Single-ended clock
single-ended clock single- single-ended clock single-ended data
ended data
and or data
1.5 Gb/s
1.5 Gb/s
600 Mb/s
250 mV _p-p
Requires 100-pin Samtec
connector designed into the
target system
V_max - V_min
200 mV
Requires 100-pin
Samtec connector
designed into the
target system
300 mV _p-p
Requires 38-pin Mictor
connector designed into
the target system
Input capacitance
Additional
supplies
Number of probes
required per
U4201A cable
1.5 pF
1.5 pF
3.0 pf
See Table 4 page 34 for shrouds and pc board connectors
1
2
1
General purpose flying lead sets
E5382B
E5381B
Flexible connection to many signals
17
17
16 data, 1 clock
16 data, 1 clock
Differential or
Differential or single-
single-ended clock ended clock and or data
single-ended data
1.5 Gb/s
1.5 Gb/s
250 mV _p-p
Compatible with a
wide assortment
of accessories to
connect to individual
leads
V_max - V_min
200 mV
Compatible with a
wide assortment of
accessories to connect to
individual leads
1.3 pF
0.9 pF
See Table 1 (page 10) See Figure 4.4 (page 13)
2
2