BX80547PG3200FSL8Q6 Datasheet, PDF (91/105 Pages) Intel Corporation – Intel® Pentium® 4 Processor 6xxΔ Sequence and Intel® Pentium® 4 Processor Extreme Edition

Boxed Processor Specifications
7 Boxed Processor Specifications
The Pentium 4 processor will also be offered as a boxed processor. Boxed processors are intended
for system integrators who build systems from baseboards and standard components. The boxed
Pentium 4 processor will be supplied with a cooling solution. This chapter documents baseboard
and system requirements for the cooling solution that will be supplied with the boxed Pentium 4
processor. This chapter is particularly important for OEMs that manufacture baseboards for system
integrators. Unless otherwise noted, all figures in this chapter are dimensioned in millimeters and
inches [in brackets]. Figure 7-1 shows a mechanical representation of a boxed Pentium 4 processor.
Note:
Drawings in this section reflect only the specifications on the boxed processor product. These
dimensions should not be used as a generic keep-out zone for all cooling solutions. It is the system
designers’ responsibility to consider their proprietary cooling solution when designing to the
required keep-out zone on their system platforms and chassis. Refer to the Intel^® Pentium^® 4
Processor on 90 nm Process on 90 nm Process in the 775-land LGA Package Thermal Design
Guidelines for further guidance.
Figure 7-1. Mechanical Representation of the Boxed Processor
NOTE: The airflow of the fan heatsink is into the center and out of the sides of the fan heatsink.
Datasheet
91