BX80547PG3200FSL8Q6 Datasheet, PDF (69/105 Pages) Intel Corporation – Intel® Pentium® 4 Processor 6xxΔ Sequence and Intel® Pentium® 4 Processor Extreme Edition

Land Listing and Signal Descriptions
Table 4-3. Signal Description (Sheet 1 of 9)
Name
DRDY#
Type
Description
Input/
Output
DRDY# (Data Ready) is asserted by the data driver on each data transfer,
indicating valid data on the data bus. In a multi-common clock data transfer,
DRDY# may be de-asserted to insert idle clocks. This signal must connect the
appropriate pins/lands of all processor FSB agents.
DSTBN[3:0]# are the data strobes used to latch in D[63:0]#.
DSTBN[3:0]#
Input/
Output
Signals
D[15:0]#, DBI0#
D[31:16]#, DBI1#
D[47:32]#, DBI2#
D[63:48]#, DBI3#
Associated Strobe
DSTBN0#
DSTBN1#
DSTBN2#
DSTBN3#
DSTBP[3:0]#
DSTBP[3:0]# are the data strobes used to latch in D[63:0]#.
Input/
Output
Signals
D[15:0]#, DBI0#
D[31:16]#, DBI1#
D[47:32]#, DBI2#
D[63:48]#, DBI3#
Associated Strobe
DSTBP0#
DSTBP1#
DSTBP2#
DSTBP3#
FCx
FERR#/PBE#
GTLREF
GTLREF_SEL
HIT#
HITM#
Other
FC signals are signals that are available for compatibility with other processors.
Contact your Intel representative for further details and documentation.
Output
FERR#/PBE# (floating point error/pending break event) is a multiplexed signal
and its meaning is qualified by STPCLK#. When STPCLK# is not asserted,
FERR#/PBE# indicates a floating-point error and will be asserted when the
processor detects an unmasked floating-point error. When STPCLK# is not
asserted, FERR#/PBE# is similar to the ERROR# signal on the Intel 387
coprocessor, and is included for compatibility with systems using MS-DOS*-
type floating-point error reporting. When STPCLK# is asserted, an assertion of
FERR#/PBE# indicates that the processor has a pending break event waiting
for service. The assertion of FERR#/PBE# indicates that the processor should
be returned to the Normal state. For additional information on the pending break
event functionality, including the identification of support of the feature and
enable/disable information, refer to volume 3 of the Intel Architecture Software
Developer's Manual and the Intel Processor Identification and the CPUID
Instruction application note.
Input
GTLREF determines the signal reference level for GTL+ input signals. GTLREF
is used by the GTL+ receivers to determine if a signal is a logical 0 or logical 1.
Contact your Intel representative for further details and documentation.
Output
GTLREF_SEL is used to select the appropriate chipset GTLREF voltage.
Contact your Intel representative for further details and documentation.
Input/
Output
Input/
Output
HIT# (Snoop Hit) and HITM# (Hit Modified) convey transaction snoop operation
results. Any FSB agent may assert both HIT# and HITM# together to indicate
that it requires a snoop stall that can be continued by reasserting HIT# and
HITM# together.
Datasheet
69