NQ41210SL7JE Datasheet, PDF (38/52 Pages) Intel Corporation – Intel® 41210 Serial to Parallel PCI Bridge

41210 Bridge — Datasheet
Figure 8.
• RCOMP is an analog PCI interface compensation pin to the 41210 Bridge. A 100 ±1% pull-
down resistor should be used to connect the RCOMP pin to ground.
All three of these implementations are shown in Figure 8.
41210 Bridge Reference and Compensation Circuit Implementations
3.9
3.9.1
3.9.2
Thermal Specifications
Power
For TDP specifications, see 41210 Bridge Thermal Specifications for the 41210 Bridge
component. FC-BGA packages have poor heat transfer capability into the board and have minimal
thermal capability without thermal solutions. Intel recommends that system designers plan for a
heatsink when using the 41210 Bridge component.
Die Temperature
To ensure proper operation and reliability of the 41210 Bridge component, the die temperatures
must be at or below the values specified in Table 30. System and/or component level thermal
solutions are required to maintain die temperatures below the maximum temperature
specifications.
38