NQ41210SL7JE Datasheet, PDF (23/52 Pages) Intel Corporation – Intel® 41210 Serial to Parallel PCI Bridge

Figure 2. Compliance Test/Measurement Load
Datasheet — 41210 Bridge
.
Figure 3.
The test load is shown at the transmitter package reference plane, but the same Test/Measurement
load is applicable to the receiver package reference plane. CTX is an optional portion of the
measurement test load. The measurement should be taken on the opposite side of the capacitor
from the package, and the value of the CTX must be in the range of 75 nF to 200 nF.
Minimum Receiver Eye Timing and Voltage Compliance Specification
The RX eye diagram must be aligned in time using the jitter median to locate the center of the eye
diagram. The eye diagram must be valid for any 250 consecutive UIs. An appropriate average TX
UI must be used as the interval for measuring the eye diagram.
23