PD6710 Datasheet, PDF (20/138 Pages) Intel Corporation – ISA-to-PC-Card (PCMCIA) Controllers

PD6710/’22 — ISA-to-PC-Card (PCMCIA) Controllers
Table 2. Socket Interface Pins (Sheet 1 of 4)
Pin Number
Pin Name¹
Description²
PD6710
PD6722
Qty. I/O Pwr. Drive
Socket A Socket B
Register Access: In Memory Card
Interface mode, this output chooses
between attribute and common
memory. In I/O Card Interface mode for
non-DMA transfers, this signal is active
(low).
-REG
For DMA cycles on the PD6722 to a
8
DMA-capable card, -REG is inactive
during I/O cycles to indicate a DMA
cycle to or from the PC Card.
In ATA mode, this signal is always
inactive.
8
71
1 O-TS 2 or 3 2 mA
A[25:0]
PC Card socket address outputs.
110, 108,
48, 46, 44,
42, 40, 38,
36, 34, 32,
41, 43, 35,
33, 45, 27,
24, 29, 31,
47, 49, 50,
53, 56, 58,
59, 61
48, 46, 44,
42, 40, 38,
36, 34, 32,
41, 43, 35,
33, 45, 25,
21, 28, 30,
47, 49, 50,
53, 55, 57,
58, 60
106, 104,
102, 100,
98, 96, 94,
103, 105,
97, 95,
107, 89,
85, 91, 93,
109, 112,
113, 115,
118, 120,
26
O-TS 2 or 3 2 mA
121, 123
D[15:0] † PC Card socket data I/O signals.
23, 21, 17,
14, 12, 68,
66, 64, 19,
15, 13, 11,
9, 67, 65, 63
20, 18, 16,
14, 12, 67,
65, 63, 17,
15, 13, 11,
9, 66, 64,
62
84, 82, 80,
77, 75,
130, 128,
126, 81,
78, 76, 74,
72, 129,
127, 125
16
I/O 2 or 3 2 mA
Output Enable: For non-DMA
transfers, this output goes active (low)
to indicate a memory read from the
socket.
During a DMA write (when -IORD is
-OE
active) this output goes low if the ISA
26
output TC is active (high), indicating to
the card that the system’s terminal
count signal is active. During DMA
reads (when -IOWR is active), this
output remains high.
23
87
1 O-TS 2 or 3 2 mA
1. ¹To differentiate the sockets, all PD6722 pin names have either A_ or B_ prepended to the pin names indicated. For example,
A_A[25:0] and B_A[25:0] are the independent address buses to the sockets.
2. ²When a socket is configured as an ATA drive interface, socket interface pin functions change. See Table 17 on page 88.
20
Datasheet